M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 10.70mm
Twister XD 5X coolant-fed drill delivers 10.70 mm holes with through-tool coolant delivery
- Twister XD design enables 5× diameter drilling depth
- 70 mm diameter suits precise hole sizing
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning discloses regulated chemical content
M.A. Ford Twister XD 5X 10.70mm Drill
The M.A. Ford Twister XD 5X is a coolant-fed drill with a 10.70mm cutting diameter. It is built for machine-shop professionals who need a single tool for deep-hole drilling in tough alloys. The design delivers coolant directly to the cutting zone to manage heat and improve chip evacuation. This item is supplied new from the manufacturer.
Suited for CNC deep-hole work; not for hand-held use
This drill suits CNC operators running dedicated coolant-through spindles who require 5× diameter reach in materials such as stainless steel or titanium. It is not for builders who need a hand-held or short-length drill, nor for shops without high-pressure coolant capability. Buyers who want a general-purpose twist drill should look at a different tool.
10.70mm cutting diameter
The 10.70mm diameter is the single specification that determines whether this drill matches the hole size required by the job. If the print calls for a different diameter, this part will not fit the application. Verify the required hole size before ordering.
Highlights
- Twister XD design enables 5× diameter drilling depth
- 70 mm diameter suits precise hole sizing
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 10.70mm Twister XD 5X coolant-fed drill and what step is often missed?
Secure the drill in a rigid holder, connect coolant through the tool at the recommended pressure, and verify flow before starting — skipping the flow check is the most common error.
What maintenance or replacement will the 10.70mm Twister XD 5X drill need later?
Inspect cutting edges for flank wear after each job, clean coolant passages to prevent blockage, and replace the drill when edge wear or chipping affects hole quality.
What limit appears first on the 10.70mm Twister XD 5X drill during sustained use?
Flank wear on the cutting margins typically reaches the replacement threshold before shank or flute fatigue becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
