M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 10.60mm 2XDCR4173A
A 10.60 mm coolant-fed drill designed for five-times-diameter deep-hole drilling
- 5x coolant-fed design clears chips efficiently
- 60 mm diameter suits precise hole sizing
- Twister XD series built for demanding drilling tasks
- M.A. Ford quality ensures reliable cutting performance
- New condition guarantees full factory specification
Professional-grade drill for precision metalworking
The M.A. Ford Twister XD 5X Coolant Fed Drill targets machinists and fabricators who need accurate 10.60mm holes in demanding materials. Its through-coolant design supports extended production runs where heat management is critical. Buyers who require larger diameters or non-coolant tooling should select a different model.
5× diameter drilling depth
The defining specification is the 5X length-to-diameter ratio combined with coolant-through capability, allowing deep-hole drilling up to five times the 10.60mm diameter while evacuating chips and controlling temperature. This single parameter determines whether the tool matches your hole-depth requirement.
Requires a coolant-through spindle
The drill must be used in a machine equipped with through-spindle coolant delivery and a suitable tool holder to activate its internal cooling channels. When properly installed, it frees the operator from frequent peck cycles and reduces the risk of tool breakage in deep holes.
Highlights
- 5x coolant-fed design clears chips efficiently
- 60 mm diameter suits precise hole sizing
- Twister XD series built for demanding drilling tasks
- M.A. Ford quality ensures reliable cutting performance
- New condition guarantees full factory specification
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in the Twister XD name mean for drilling depth?
The 5X designation indicates a drilling depth up to five times the drill diameter.
What shank interface does the 2XDCR4173A use and what does it limit?
The drill uses a standard cylindrical shank that fits common drill chucks and collets, limiting use to holders that accept round shanks.
What physical space and coolant setup does the 10.60 mm drill need to fit and run?
The 10.60 mm diameter requires a machine spindle and holder that accept this size, plus a through-coolant supply connected to the tool’s internal feed channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
