M.A. Ford
M.A. Ford Twister Xd 5X 11.00 mm Solid Carbide Drill 2XDSR4331A
Solid carbide drill bit cuts 11.00 mm holes in metal with five-times-diameter reach
- Solid carbide construction resists wear during high-speed drilling
- Twister Xd 5X geometry improves chip evacuation in deep holes
- 00 mm diameter suits precise metalworking applications
- M.A. Ford manufacturing ensures consistent cutting performance
- California Proposition 65 warning discloses regulated chemical content
Twister Xd 5X 11.00 mm Solid Carbide Drill
The M.A. Ford Twister Xd 5X is a solid carbide drill with an 11.00 mm diameter. It is designed for high-performance drilling in demanding industrial applications. The tool suits machinists and maintenance teams requiring precision holemaking in tough materials.
Upgrade from standard carbide drills
This Twister Xd 5X series replaces general-purpose carbide drills when longer tool life and tighter tolerances are needed. The 5X geometry improves chip evacuation and heat resistance. The jump is justified for high-volume runs where reduced cycle time and fewer tool changes lower overall cost per hole.
Suits CNC and rigid manual setups
The drill performs best in rigid CNC machines or heavy-duty drill presses with through-coolant capability. Operators without flood coolant or stable workholding should consider alternative tooling. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Solid carbide construction resists wear during high-speed drilling
- Twister Xd 5X geometry improves chip evacuation in deep holes
- 00 mm diameter suits precise metalworking applications
- M.A. Ford manufacturing ensures consistent cutting performance
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 11.00 mm Twister Xd 5X drill require in the holder?
The 11.00 mm solid carbide drill uses a matching 11.00 mm straight shank; choose a collet or hydraulic holder bored to that diameter.
Which step is most often missed when installing this solid carbide drill in a CNC machine?
Operators often skip verifying run-out after clamping; indicate the drill at the tip and adjust until total indicated run-out is within the machine spindle tolerance.
How do I know when the 11.00 mm Twister Xd 5X drill needs replacement?
Replace the drill when flank wear reaches the limit set by your process control plan or when hole diameter drifts outside tolerance; solid carbide at this diameter is not typically re-ground.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
