M.A. Ford
M.A. Ford Twister XD 3X Solid Carbide Drill 15.70Mm
Solid carbide drill creates precise 15.70 mm holes in demanding materials
- Solid carbide construction delivers long tool life
- 3× diameter flute length enables deeper holes per pass
- 70 mm cutting diameter suits precise metric bores
- Twister XD geometry reduces thrust and heat buildup
- California Prop 65 notice discloses regulated substances present
Twister XD 3X 15.70mm drill bit
The M.A. Ford Twister XD 3X is a solid carbide drill designed for demanding drilling tasks in workshops and production environments. Its 15.70mm cutting diameter suits applications that require a precise hole at this specific size. The solid carbide construction provides the rigidity needed for accurate results in tough materials.
Carbide tool practical limits
Solid carbide offers high hardness and wear resistance but is more brittle than high-speed steel alternatives. The 15.70mm diameter requires sufficient machine rigidity and spindle power to maintain stability during the cut. Interrupted cuts or excessive run-out can cause chipping or premature failure of the cutting edges.
Installation and common issues
Secure the drill in a high-quality collet or hydraulic holder to minimise run-out and vibration. Use the correct coolant pressure and flow for the material being drilled to evacuate chips effectively. The most frequent problems are chipping from poor clamping, overheating from insufficient coolant, and hole oversize caused by excessive run-out.
Highlights
- Solid carbide construction delivers long tool life
- 3× diameter flute length enables deeper holes per pass
- 70 mm cutting diameter suits precise metric bores
- Twister XD geometry reduces thrust and heat buildup
- California Prop 65 notice discloses regulated substances present
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Is the 15.70 mm diameter the only size in this Twister XD 3X series?
The listing shows the 15.70 mm Twister XD 3X drill; other diameters in the series are not covered by this product page.
What does the 3X designation mean for hole depth?
The 3X label indicates a drilling depth capability of three times the 15.70 mm diameter.
What shank standard does the 2XDSS6181A use?
The drill features a straight cylindrical shank sized to match the 15.70 mm cutting diameter for standard tool-holder clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
