M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 9.60mm 2XDCS3780A
Three-times-diameter coolant-fed drill bit cuts 9.60 mm holes efficiently
- 3X coolant-fed design clears chips efficiently
- 60 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford brand trusted by professionals
- California Proposition 65 warning informs safe handling
What the drill is and who it suits
The M.A. Ford Twister Xd 3X is a coolant-fed drill with a 9.60 mm cutting diameter. It is built for machine shops that need accurate holes in metal and composite workpieces where through-tool coolant improves chip evacuation and tool life.
What the coolant-fed design changes
Internal coolant channels deliver cutting fluid directly to the tip, reducing heat build-up and helping to clear swarf from deep holes. This supports higher feed rates and more consistent hole quality compared with external flood cooling alone.
Build quality and day-to-day fit
The solid carbide construction resists wear in abrasive materials, while the standard shank fits common ER collets and hydraulic holders. The 3X diameter flute length suits typical production depths without requiring special tool holders or extended-reach setups.
Highlights
- 3X coolant-fed design clears chips efficiently
- 60 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford brand trusted by professionals
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 9.60 mm coolant-fed drill bit need replacement under normal use?
Replacement depends on material hardness, feed rate and coolant quality; inspect the cutting edges regularly and replace when wear reduces hole tolerance or surface finish.
What limits continuous drilling depth with the 3X coolant-fed design?
The 3X diameter flute length and coolant delivery set the practical depth limit; chip evacuation and heat buildup become the governing factors beyond that range.
Does the 9.60 mm Twister XD drill generate excessive heat during all-day CNC cycles?
Through-tool coolant flow manages cutting-zone temperature; sustained heat is controlled as long as coolant pressure and filtration are maintained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
