M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 8.10mm 2XDCS3189A
A coolant-fed twist drill with three-times-diameter flute length for 8.10 mm holes
- 3X coolant-fed design clears chips efficiently for deeper holes
- 10 mm diameter suits precise drilling tasks
- Twister XD geometry increases tool life in tough materials
- M.A. Ford manufacturing ensures consistent cutting performance
- California Prop 65 warning informs safe handling practices
Twister XD 3X Coolant-Fed Drill 8.10 mm
The M.A. Ford Twister XD 3X is a coolant-fed drill designed for precision hole-making in industrial applications. Its 8.10 mm diameter suits tasks requiring consistent chip evacuation and temperature control. The tool targets machinists and maintenance teams working with demanding materials. It arrives in new condition directly from the manufacturer.
Suited for high-efficiency drilling
This drill serves operators who need reliable performance in deep-hole or high-heat scenarios where flood coolant cannot reach the cutting zone. It is not intended for hand-held use or machines lacking through-spindle coolant capability. Buyers without compatible toolholders or coolant systems should consider alternative drilling methods. The California Proposition 65 notice indicates chemical exposure risks requiring proper handling.
Ships direct from manufacturer
The product ships free directly from M.A. Ford, reducing transit steps and potential damage. No additional tooling, software, or coolant additives are included in the shipment. Users must supply their own holders, inserts, and cutting fluid appropriate for the workpiece material. The 2XDCS3189A part number simplifies reordering through industrial supply channels.
Highlights
- 3X coolant-fed design clears chips efficiently for deeper holes
- 10 mm diameter suits precise drilling tasks
- Twister XD geometry increases tool life in tough materials
- M.A. Ford manufacturing ensures consistent cutting performance
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system do I need to run this 8.10 mm Twister XD drill?
It requires a CNC or rigid milling machine with through-spindle coolant delivery capable of feeding fluid directly to the 8.10 mm cutting zone.
Can I use this 3X coolant-fed drill in a standard drill press that only has flood coolant?
No, the 3X design depends on high-pressure through-tool coolant; flood coolant on a conventional drill press cannot reach the drill point effectively.
How do I verify the 2XDCS3189A is cutting correctly once installed?
Check for consistent chip evacuation, steady spindle load, and hole diameter holding at 8.10 mm with no discoloration on the cutting edges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
