M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 8.00 mm 2XDCS3150A
Coolant-fed Twister Xd drill cuts three times diameter in 8.00 mm steel
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability reduces cycle time for 8.00 mm holes
- Twister Xd geometry improves hole accuracy in tough materials
- M.A. Ford manufacturing ensures consistent performance in production runs
- California Proposition 65 notice included for workplace safety compliance
Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a precision cutting tool designed for metalworking professionals. Its 8.00 mm diameter and internal coolant channels support efficient chip evacuation during deep-hole drilling operations. This new drill suits machinists who require consistent performance in demanding production environments.
Upgrade from standard twist drills
Conventional twist drills without coolant feed often struggle with heat buildup and chip packing in deeper holes. The 3X length design combined with through-tool coolant delivery addresses these limitations directly. The jump is worth it when hole depth exceeds the effective range of standard external-cooling methods.
Practical limits of coolant-fed drilling
Effective use requires a machine spindle and holder capable of delivering coolant at sufficient pressure through the tool shank. Without compatible equipment the internal channels cannot function as intended. California Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability reduces cycle time for 8.00 mm holes
- Twister Xd geometry improves hole accuracy in tough materials
- M.A. Ford manufacturing ensures consistent performance in production runs
- California Proposition 65 notice included for workplace safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size collet or holder does the 8.00 mm shank require?
Use a holder or collet sized for an 8.00 mm shank; the drill is designed for direct fit in standard 8 mm tooling.
How do I connect coolant to the through-tool channels?
Fit the drill into a coolant-through holder and supply coolant at the machine’s recommended pressure; do not run dry.
When should I replace the 2XDCS3150A drill?
Replace it when the cutting lips show visible wear, chipping, or when hole size and finish drift out of tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
