M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 7.10 mm
A 7.10 mm coolant-fed drill designed for three-times-diameter drilling depth
- Twister Xd design drills three diameters deep per pass
- 10 mm cutting diameter matches precise hole requirements
- Internal coolant feed clears chips and reduces heat
- M.A. Ford manufacturing delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
M.A. Ford Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a precision cutting tool designed for machinists and maintenance engineers who require accurate hole-making in metal components. Its 7.10 mm diameter suits specific pilot-hole and through-hole requirements in professional workshops.
Coolant-fed design and build quality
Internal coolant channels deliver cutting fluid directly to the drill point, improving chip evacuation and reducing heat buildup during deep-hole drilling. The solid carbide construction resists wear under high-speed conditions, while the shank fits standard tool holders for secure clamping in CNC machines or manual drill presses.
Upgrading from standard twist drills
This drill replaces conventional non-coolant twist drills when cycle times must be shortened and tool life extended in difficult alloys. The jump is justified for shops running repeated deep-hole operations where external flood coolant cannot reach the cutting zone effectively.
Highlights
- Twister Xd design drills three diameters deep per pass
- 10 mm cutting diameter matches precise hole requirements
- Internal coolant feed clears chips and reduces heat
- M.A. Ford manufacturing delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank type does the 7.10 mm Twister Xd drill use for coolant-fed operation?
The 2XDCS2795A model uses a cylindrical shank with internal coolant channels that feed fluid directly to the cutting edges through the tool body.
What holder clearance is required for the 7.10 mm coolant-fed drill?
A standard 7.10 mm drill chuck or hydraulic holder with through-coolant capability accepts the shank; the flute length and overall length fit typical CNC tool changers.
How is the coolant feed connected when installing the 7.10 mm Twister Xd drill?
Install the drill into a through-coolant holder, ensure the holder's coolant port aligns with the shank inlet, then tighten the holder — skipping the alignment step blocks coolant flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
