M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 6.60 mm
A 6.60 mm coolant-fed drill designed for three-times-diameter drilling depth
- Twister XD design delivers 3× drilling performance
- 60 mm diameter fits precise hole requirements
- Coolant-fed operation extends tool life
- M.A. Ford quality ensures reliable results
- California Proposition 65 compliance disclosed
M.A. Ford Twister XD 3X Drill 6.60 mm
The M.A. Ford Twister XD 3X is a coolant-fed drill designed for precision holemaking in demanding materials. Its 6.60 mm cutting diameter suits targeted industrial applications where through-tool coolant delivery improves chip evacuation and tool life. This new cutting tool is aimed at machinists and maintenance teams needing reliable performance in deep-hole or high-temperature drilling scenarios.
Check machine coolant system compatibility
Verify that your machine spindle and tool holder support through-coolant delivery before ordering. The drill requires a sealed connection from the coolant source through the holder to the tool shank to function as intended. Confirm the shank style matches your holder type and that the coolant pressure available meets the demands of the intended workpiece material and hole depth.
Thermal management via through-tool coolant
Internal coolant channels direct fluid to the cutting zone, controlling heat generation during extended cuts. This design reduces thermal stress on both the drill and the workpiece, supporting consistent dimensional accuracy. Efficient chip evacuation through the same channels minimises recutting and friction, contributing to lower cutting forces and quieter operation compared with external flood cooling alone.
Highlights
- Twister XD design delivers 3× drilling performance
- 60 mm diameter fits precise hole requirements
- Coolant-fed operation extends tool life
- M.A. Ford quality ensures reliable results
- California Proposition 65 compliance disclosed
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes with the Twister XD 3X Coolant Fed Drill and what must I supply?
The drill itself is included; you will need a compatible coolant-fed tool holder and a machine spindle that accepts 6.60 mm shank drills.
Which Twister XD 3X Coolant Fed Drill version should I choose for a 6.60 mm hole?
Select the 2XDCS2598A model, which is manufactured specifically for a 6.60 mm cutting diameter.
What does the 6.60 mm figure mean when the drill is in the machine?
It is the nominal cutting diameter, so the drill will produce a 6.60 mm hole when run under proper coolant-fed conditions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
