M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 6.00mm
Coolant-fed drill bit delivers internal lubrication for precise 6.00 mm holes
- 00 mm diameter for precise hole sizing
- Coolant-fed design improves chip evacuation
- Twister Xd geometry enhances drilling efficiency
- M.A. Ford brand trusted for industrial quality
- Model 2XDCS2362A identifies exact specification
M.A. Ford Twister Xd 6 mm drill
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a 6.00 mm cutting tool designed for machine-based drilling operations. Internal coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and extending tool life in demanding materials. It is supplied new and ships directly from the manufacturer.
Suited for CNC and production drilling.
This drill suits workshops running CNC machines or dedicated drilling units that can supply through-tool coolant at pressure. Buyers without a coolant-fed spindle or rigid machine setup should look at something else, as the design relies on internal fluid delivery for performance and cannot be used effectively in portable drills or manual press work.
6.00 mm nominal diameter
The single specification that decides fit is the 6.00 mm cutting diameter. Match this exactly to the hole size required by your drawing or process plan; no other dimension from the data determines compatibility.
Highlights
- 00 mm diameter for precise hole sizing
- Coolant-fed design improves chip evacuation
- Twister Xd geometry enhances drilling efficiency
- M.A. Ford brand trusted for industrial quality
- Model 2XDCS2362A identifies exact specification
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Twister Xd 3X Coolant Fed Drill size should I choose for a 6 mm hole?
The 2XDCS2362A is a 6.00 mm diameter drill, so select this version when the finished hole must be exactly 6 mm.
What does the 6.00 mm diameter mean once the drill is in the machine?
It produces a 6.00 mm hole; the 3× length gives roughly three times the diameter for reach, and the coolant-fed design delivers fluid directly to the cutting zone for chip evacuation and tool life.
What shank interface does the 2XDCS2362A use and what does that limit?
It uses a standard cylindrical shank that fits common drill chucks and collets; the shank diameter matches the 6.00 mm body, so the maximum chuck capacity required is 6 mm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
