M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 5.20 mm
Coolant-fed drill bit with 5.20 mm diameter for efficient chip evacuation
- Precise 5.20 mm holes for tight-tolerance assemblies
- Coolant-fed design clears chips for deeper drilling
- Twister XD geometry reduces cutting forces and heat
- M.A. Ford manufacturing ensures consistent tool life
- California Proposition 65 warning informs safe handling practices
Twister XD 3X Coolant Fed Drill 5.20 mm
This new drill from M.A. Ford is designed for precision holemaking with internal coolant delivery. The 5.20 mm diameter suits targeted drilling tasks in metalworking environments. It serves machinists and fabricators who need reliable chip evacuation and tool life in production settings.
Sustained load behaviour with coolant feed
Internal coolant channels direct fluid to the cutting zone during extended drilling cycles. This design helps manage heat buildup and flush chips continuously under sustained load. The 3X geometry supports stable performance in deeper holes where heat and chip packing typically degrade results.
Practical limits of the coolant fed interface
Effective coolant pressure and filtration determine how well the internal channels perform in practice. Insufficient flow or contaminated fluid can reduce the benefits of the fed design. The tool’s capability depends on the machine’s coolant system matching the drill’s requirements for pressure and cleanliness.
Highlights
- Precise 5.20 mm holes for tight-tolerance assemblies
- Coolant-fed design clears chips for deeper drilling
- Twister XD geometry reduces cutting forces and heat
- M.A. Ford manufacturing ensures consistent tool life
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 5.20 mm Twister XD drill generate noticeable heat or vibration during extended CNC cycles?
The solid-carbide 3X coolant-fed design channels fluid through the tool to the cutting zone, which reduces heat build-up and dampens vibration during long production runs.
What machine and coolant setup is required to run this 5.20 mm coolant-fed drill?
A CNC spindle with through-coolant capability and a compatible 5.20 mm tool holder are needed; the drill itself has no external fittings beyond the standard shank.
Will the 5.20 mm Twister XD fit the same tool holders and collets as older 5.20 mm drills in my shop?
Yes, the shank follows the standard 5.20 mm diameter tolerance, so it fits existing ER collets, hydraulic holders and shrink-fit adapters used for previous drills of this size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
