M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 4.70 mm 2XDCS1850A
Three-times-diameter coolant-fed drill cuts 4.70 mm holes with through-tool coolant delivery
- 3X coolant-fed design clears chips efficiently
- 70 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford construction ensures professional durability
- California Proposition 65 warnings apply for safety awareness
4.70 mm Coolant-Fed Drill
The M.A. Ford Twister Xd drill creates a precise 4.70 mm hole using a 3X diameter flute length. Internal coolant channels deliver fluid directly to the cutting zone for chip evacuation and temperature control. This design suits production drilling in steel, stainless alloys and cast iron where consistent hole quality is required.
Sustained drilling behaviour
Continuous coolant flow prevents heat build-up during extended cuts, keeping the cutting edges stable across long production runs. The 3X flute geometry maintains rigidity while allowing deep chip removal without peck cycles. Operators see reduced edge wear and tighter diameter tolerance compared with external-flood tools under identical parameters.
Pre-order checks
Verify that your machine spindle accepts a coolant-through holder and can supply the pressure needed for the internal channels. Confirm the 4.70 mm diameter matches the hole specification and that the 3X flute length fits the workpiece thickness and fixture clearance. Ensure your coolant system is compatible with the California Proposition 65 chemical notice.
Highlights
- 3X coolant-fed design clears chips efficiently
- 70 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford construction ensures professional durability
- California Proposition 65 warnings apply for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the Twister Xd 3X drill generate during continuous drilling?
The solid-carbide 4.70 mm Twister Xd 3X drill runs cooler because its internal coolant channels flush heat directly from the cutting zone while you work.
What machine and coolant setup does the 2XDCS1850A require?
You need a CNC or rigid mill spindle that accepts a 4.70 mm shank plus a through-spindle coolant system capable of delivering pressure to the drill's internal ports.
Will this coolant-fed drill work in my older drill press without through-spindle coolant?
No — the 2XDCS1850A depends on internal coolant delivery; a conventional drill press without through-spindle feed cannot supply the required flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
