M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 4.10mm 2XDCS1614A
Coolant-fed 4.10 mm drill bit delivers internal lubrication for deeper, cleaner holes in metal
- Twister Xd design enables 3× diameter drilling depth with 4.10mm precision
- Coolant-fed operation clears chips and controls heat during deep-hole drilling
- M.A. Ford manufacturing ensures consistent geometry and edge quality
- California Proposition 65 notice informs safe handling of listed chemicals
- 2XDCS1614A part number simplifies reordering and tool management
Twister Xd 3X Coolant Fed Drill 4.10 mm
This solid-carbide drill is built for high-performance drilling in steel, stainless steel and cast iron. The through-coolant design delivers lubricant directly to the cutting zone for improved chip evacuation and longer tool life. It suits CNC operators and job-shop machinists who need consistent hole quality at elevated speeds.
Check machine coolant capability and holder fit
Verify that your machining centre can supply through-spindle coolant at the pressure your process requires. Confirm the shank diameter matches your tool-holder specification before ordering. Ensure the workpiece material and depth-to-diameter ratio suit a 3×D drill length.
Solid carbide construction with coolant channels
The integral coolant passages are formed during grinding, eliminating brazed joints that can leak under pressure. A cylindrical shank fits standard hydraulic, shrink-fit or collet holders without adapters. The 4.10 mm cutting diameter produces accurate holes straight from the machine spindle.
Highlights
- Twister Xd design enables 3× diameter drilling depth with 4.10mm precision
- Coolant-fed operation clears chips and controls heat during deep-hole drilling
- M.A. Ford manufacturing ensures consistent geometry and edge quality
- California Proposition 65 notice informs safe handling of listed chemicals
- 2XDCS1614A part number simplifies reordering and tool management
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes in the box with the M.A. Ford 2XDCS1614A Twister Xd drill?
The box contains the 4.10 mm Twister Xd 3X coolant-fed drill. No separate coolant fittings or holders are included.
How do I choose between available versions of this 4.10 mm drill?
The 2XDCS1614A is a single 3X length variant. Other lengths or diameters carry different part numbers.
What does the 3X designation mean when the drill is in the machine?
It indicates a flute length three times the 4.10 mm diameter, giving deeper hole capability per pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
