M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 4.00 mm
A 4.00 mm coolant-fed drill for efficient chip evacuation and tool life
- Twister Xd design enables 3× faster drilling with coolant feed
- 00 mm diameter suits precise hole-making tasks
- Coolant-fed operation reduces heat buildup during extended use
- M.A. Ford engineering delivers reliable performance in demanding applications
- California Proposition 65 compliance ensures chemical safety awareness
Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd is a coolant-fed drill designed for precise hole-making in metalworking applications. Its 4.00 mm diameter suits tasks that require consistent chip evacuation and temperature control. Machinists and fabricators use it where through-tool coolant delivery improves reliability.
Thermals noise and power draw
Coolant fed directly to the cutting zone manages heat during normal drilling cycles. Reduced thermal buildup lowers the risk of workpiece distortion and extends edge life. The design avoids excess friction, so the spindle runs smoothly without audible vibration. Power consumption stays predictable across standard feed rates.
Sustained load behaviour
Under continuous operation the internal coolant passages maintain steady flow, preventing temperature spikes that can dull the cutting edges. Chip removal remains consistent even during deep holes, reducing the chance of binding or breakage. The tool holds diameter tolerance over long production runs without frequent re-sharpening.
Highlights
- Twister Xd design enables 3× faster drilling with coolant feed
- 00 mm diameter suits precise hole-making tasks
- Coolant-fed operation reduces heat buildup during extended use
- M.A. Ford engineering delivers reliable performance in demanding applications
- California Proposition 65 compliance ensures chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 2XDCS1575A Twister Xd drill in my coolant-fed holder?
Clamp the 4.00 mm shank in a compatible coolant-fed holder, align the internal coolant hole with the machine supply, and torque the holder per the machine manual — skipping the alignment step causes premature wear.
What maintenance does the 2XDCS1575A Twister Xd drill need?
Inspect the cutting edges and coolant hole after each job; resharpen when flank wear reaches the limit and clear any chip buildup in the 4.00 mm coolant channel to maintain flow.
What limit appears first on the 2XDCS1575A Twister Xd under sustained drilling?
The 4.00 mm coolant passage restricts flow at high RPM, so heat buildup at the cutting zone becomes the limiting factor before flank wear reaches the resharpen threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
