M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 3.90mm
Coolant-fed drill bit delivers 3.90 mm holes with through-tool lubrication for reduced heat and longer life
- Coolant-fed design clears chips from deep holes
- 3X diameter reach drills deeper in one pass
- 90 mm diameter suits precise drilling tasks
- M.A. Ford quality ensures reliable cutting performance
- California Proposition 65 warning informs safe handling
Application and Purpose
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a precision cutting tool designed for high-performance drilling in demanding materials. It targets professional machinists and manufacturing operations that require consistent hole quality and extended tool life. The 3.90 mm diameter suits specific production requirements where coolant delivery directly to the cutting zone improves chip evacuation and thermal control. This new drill supports rigorous shop-floor applications.
Suitability and Limitations
This drill suits CNC environments equipped with through-spindle or external coolant systems capable of feeding fluid through the tool body. Operations lacking high-pressure coolant delivery or running older machines without coolant-fed capability will not realise the design benefits. Buyers who need a standard twist drill for dry machining or manual drilling should look at a different tool style. The specialised geometry is not intended for general-purpose handheld use.
Critical Specification
The 3.90 mm cutting diameter is the single dimension that determines whether this drill matches the required hole size. Verifying this exact measurement against the engineering drawing or part specification confirms fit before purchase. No other specification in the data overrides this primary sizing requirement.
Highlights
- Coolant-fed design clears chips from deep holes
- 3X diameter reach drills deeper in one pass
- 90 mm diameter suits precise drilling tasks
- M.A. Ford quality ensures reliable cutting performance
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 3.90 mm coolant-fed drill need resharpening or replacement?
Resharpening intervals depend on the workpiece material and coolant quality; monitor flank wear and replace when the cutting edges no longer meet tolerance.
What limits continuous drilling depth with the 3X coolant-fed design?
The 3X diameter ratio sets the practical depth limit; chip evacuation and coolant pressure determine whether you reach that depth without pecking.
How much heat and noise does the 3.90 mm drill generate during all-day production runs?
Heat stays low because coolant flows through the tool to the cutting zone; noise is typical for high-speed carbide drilling and varies with spindle speed and workpiece clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
