M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 3.80 mm
A coolant-fed drill bit with 3.80 mm diameter for powered drilling applications
- Twister Xd design enables 3X faster drilling
- Coolant-fed system improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making
- M.A. Ford quality ensures reliable performance
- California Prop 65 warning informs safe handling
What this drill is and who uses it
The M.A. Ford Twister Xd is a 3.80 mm coolant-fed drill built for high-volume metalworking. It targets CNC operators and production engineers who need consistent hole quality in tough alloys. The through-coolant design evacuates chips efficiently during deep-hole cycles. This is a new, factory-direct tool for professional machining environments.
Who this suits and who should look elsewhere
This drill suits shops running dedicated coolant systems on rigid machines where 3.80 mm holes are a repeat requirement. It does not suit maintenance teams without through-spindle coolant capability or users needing a range of diameters from one tool. Buyers who want indexable inserts or step-drill flexibility should consider other product types.
The specification that decides fit
The 3.80 mm diameter is the single figure that determines whether this drill matches the hole spec on your drawing. If the print calls for a different size, this tool cannot be used. The 3X length ratio and coolant-fed shank are fixed features that support that specific diameter in deep-hole applications.
Highlights
- Twister Xd design enables 3X faster drilling
- Coolant-fed system improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making
- M.A. Ford quality ensures reliable performance
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 3.80 mm Twister Xd 3X drill generate during continuous coolant-fed operation?
The coolant-fed design continuously flushes the cutting zone, removing heat directly at the 3.80 mm drill tip and keeping the tool body cool during extended drilling cycles.
What machine and coolant setup must I already have to run this 3.80 mm coolant-fed drill?
You need a CNC or milling spindle with through-spindle coolant delivery and a holder that accepts a 3.80 mm shank, plus a coolant system capable of the pressure and flow the Twister Xd 3X design expects.
Will the 3.80 mm Twister Xd 3X drill fit in the same tool holders and spindles as my existing 3.80 mm drills?
Yes, the 3.80 mm shank diameter matches standard holders and collets for that size, so it interchanges with other 3.80 mm drills without new tooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
