M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 3.70mm
A 3.70 mm coolant-fed drill for deep-hole drilling with improved chip evacuation
- Coolant-fed design clears chips efficiently for deeper holes
- 70 mm diameter suits precise drilling tasks
- Twister Xd 3X geometry reduces cutting forces
- M.A. Ford brand denotes professional tool quality
- California Proposition 65 notice informs safe handling practices
Twister Xd 3X Coolant Fed Drill 3.70mm
The M.A. Ford Twister Xd is a coolant-fed drill bit designed for precision hole-making in demanding machining environments. Its 3.70 mm cutting diameter suits applications requiring this exact size. The tool targets professional machinists and maintenance technicians who need reliable performance in metalworking operations. Buyers needing different diameters or non-coolant-fed designs should select alternative tooling.
Coolant-fed drilling practical limits
Coolant-fed drills deliver cutting fluid directly to the cutting zone, improving chip evacuation and tool life in deep-hole applications. Effective use requires a machine spindle and tool holder capable of supplying coolant through the tool at adequate pressure. Workshops without through-spindle coolant capability cannot utilise this feature. The 3X designation indicates a length-to-diameter ratio suited to specific depth requirements.
3.70 mm cutting diameter decides fit
The 3.70 mm diameter is the critical specification determining whether this drill matches the required hole size. Verify the engineering drawing or component specification calls for this exact dimension before purchase. Metric drill sizes do not interchange with fractional-inch equivalents. California Proposition 65 warnings apply regarding chemical content.
Highlights
- Coolant-fed design clears chips efficiently for deeper holes
- 70 mm diameter suits precise drilling tasks
- Twister Xd 3X geometry reduces cutting forces
- M.A. Ford brand denotes professional tool quality
- California Proposition 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which diameter should I select for a 3.70 mm hole?
This drill is manufactured at 3.70 mm, so it matches that exact hole size without needing a different variant.
How does the 3X coolant-fed design perform in a CNC machine?
The 3X length and internal coolant channels deliver cutting fluid to the tip, improving chip evacuation and tool life in deep-hole drilling.
What does the 1457 designation indicate about the drill standard?
The 1457 code identifies this specific Twister Xd geometry and coolant-fed configuration within the M.A. Ford catalogue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
