M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 3.30mm 2XDCS1299A
Coolant-fed 3.30 mm drill delivers internal lubrication for deeper, cleaner holes
- Coolant-fed design clears chips from deep holes
- 3X diameter reach drills deeper in one pass
- 30 mm diameter fits precise pilot holes
- M.A. Ford quality ensures consistent cutting performance
- California Proposition 65 warning informs safe handling practices
M.A. Ford Twister XD 3X Coolant Fed Drill
The M.A. Ford Twister XD 3X Coolant Fed Drill is a 3.30 mm cutting tool designed for precision holemaking in demanding materials. It targets machinists and maintenance professionals who require reliable performance in CNC or high-volume production environments. The coolant-fed design supports efficient chip evacuation and temperature control during deep drilling cycles. This new item ships directly from the manufacturer.
Sustained load behaviour
Internal coolant channels deliver fluid directly to the cutting zone, maintaining consistent temperatures during extended operations. This design reduces thermal expansion and prevents chip packing that can degrade hole quality over long runs. The 3X diameter capability allows deeper holes without Peck cycles, improving cycle time on compatible machines. Steady coolant pressure is essential to realise these benefits under continuous load.
Verify machine compatibility
Confirm that your spindle and tool holder accept a 3.30 mm shank with through-coolant capability before ordering. The machine must supply sufficient coolant pressure and flow rate to match the drill’s internal port geometry. Review the California Proposition 65 notice regarding chemical exposure during handling and machining. Ensure workpiece clamping and machine rigidity suit the intended depth-to-diameter ratio.
Highlights
- Coolant-fed design clears chips from deep holes
- 3X diameter reach drills deeper in one pass
- 30 mm diameter fits precise pilot holes
- M.A. Ford quality ensures consistent cutting performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 3X coolant-fed design keep the 3.30 mm drill cool during continuous drilling?
The 3X coolant-fed design directs fluid through the drill body to the cutting zone, removing heat at the point of contact so the 3.30 mm tool stays cool during extended use.
What machine setup is needed to run coolant through the 2XDCS1299A drill?
A spindle or tool holder with through-coolant capability and a compatible coolant delivery system are required to supply fluid to the 2XDCS1299A drill.
Can the 3.30 mm Twister XD drill be used in older drill presses without through-coolant?
The drill will rotate in a standard chuck, but without a through-coolant spindle the internal coolant channels cannot function, so flood coolant must be used instead.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
