M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 3.20 mm 2XDCS1260A
Twister XD 3X coolant-fed drill delivers 3.20 mm holes with internal lubrication
- Twister XD design drills three diameters deep in one pass
- 20 mm cutting diameter matches precise hole requirements
- Internal coolant feed clears chips and reduces heat buildup
- M.A. Ford manufacturing delivers consistent performance in production
- California Proposition 65 notice lists chemical hazards for user awareness
Twister XD 3X coolant-fed drill
The Twister XD 3X coolant-fed drill from M.A. Ford is a precision cutting tool manufactured for machining operations that demand accurate hole placement. It arrives new and is shipped directly from the manufacturer.
3.20 mm diameter with internal coolant
The 3.20 mm diameter works with the internal coolant channel to deliver cutting fluid directly to the tip, improving chip evacuation and temperature control during drilling cycles. This design change supports consistent performance in deeper holes.
Suited for CNC and production drilling
Machinists running CNC equipment or high-volume production jobs will value the through-coolant capability and tight diameter tolerance. Shops without coolant-through spindles or those needing larger diameters should look at something else.
Highlights
- Twister XD design drills three diameters deep in one pass
- 20 mm cutting diameter matches precise hole requirements
- Internal coolant feed clears chips and reduces heat buildup
- M.A. Ford manufacturing delivers consistent performance in production
- California Proposition 65 notice lists chemical hazards for user awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 3.20 mm cutting diameter on the Twister XD 2XDCS1260A need re-grinding after extended drilling cycles?
The 3.20 mm carbide tip can be re-sharpened multiple times; plan on professional re-grinding once flank wear reaches the maximum land width recommended for the material group.
What limit appears first when the 2XDCS1260A runs continuously in deep-hole applications?
Chip evacuation through the internal coolant channel becomes the limiting factor before tool deflection or spindle torque on most CNC setups.
How much heat and noise does the Twister XD 3X drill generate during all-day production runs?
Through-spindle coolant at recommended pressure keeps the 3.20 mm cutting zone near ambient temperature and noise is dominated by the machine spindle, not the drill itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
