M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 14.70Mm 2XDCS5787A
Coolant-fed drill creates 14.70 mm holes with internal lubrication for deeper cuts
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter reach handles 14.70 mm holes in fewer passes
- Twister Xd geometry reduces cutting forces for smoother finishes
- M.A. Ford manufacturing ensures consistent tool performance
- California Proposition 65 notice alerts users to listed chemicals
14.70 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 3X is a 14.70 mm coolant-fed drill built for high-performance holemaking in demanding materials. It targets machinists and production engineers who need precise, deep-hole capability with internal coolant delivery. The tool suits CNC operations where chip evacuation and thermal control are critical.
Sustained Load Behaviour
Under continuous cutting the 3X design maintains consistent chip formation and evacuation through the coolant channels. This reduces the risk of chip packing and tool deflection during extended cycles. The geometry supports stable performance in deep-hole applications without frequent pecking interruptions.
Thermals Noise Power
Internal coolant flow manages cutting-zone temperatures directly at the drill point during normal operation. This thermal control limits workpiece distortion and extends edge life in tough alloys. The efficient heat removal also lowers cutting forces, which reduces spindle load and operational noise.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter reach handles 14.70 mm holes in fewer passes
- Twister Xd geometry reduces cutting forces for smoother finishes
- M.A. Ford manufacturing ensures consistent tool performance
- California Proposition 65 notice alerts users to listed chemicals
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the Twister Xd 3X coolant-fed drill generate much heat during extended use?
The 3X coolant-fed design delivers cutting fluid directly to the 14.70 mm cutting zone, which helps control temperature during long drilling cycles.
What tool holder or machine spindle is required to run the 14.70 mm Twister Xd drill?
You need a machine spindle or holder that accepts a 14.70 mm diameter shank and provides internal coolant delivery to match the drill’s fed-coolant design.
Will the 14.70 mm Twister Xd 3X drill fit in an older CNC lathe turret?
It fits any turret or holder that takes a 14.70 mm shank and supplies coolant through the tool; verify your older machine’s coolant pressure and port alignment before use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
