M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 14.00Mm 2XDCS5512A
A 14.00 mm coolant-fed drill designed for efficient chip removal and extended tool life
- Twister Xd design enables 3X diameter drilling depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm cutting diameter suits precise applications
- M.A. Ford manufacturing delivers professional-grade reliability
- California Proposition 65 warning informs safe handling practices
14.00 mm Twister Xd coolant drill
The M.A. Ford Twister Xd is a 14.00 mm coolant-fed drill built for three-times-diameter drilling depth. It targets machine-shop operators and maintenance teams who need reliable chip evacuation in deep holes.
Replaces standard non-coolant drills
Upgrade from a conventional twist drill when hole depth exceeds two times diameter and flood coolant cannot reach the cutting zone. The internal coolant channels flush chips continuously, reducing cycle time and preventing tool breakage in tough alloys.
Check spindle and holder compatibility
Verify that your machine spindle accepts the drill shank and that the tool holder delivers coolant through the centre at the pressure your application requires. Confirm the workpiece material matches the drill substrate before ordering.
Highlights
- Twister Xd design enables 3X diameter drilling depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm cutting diameter suits precise applications
- M.A. Ford manufacturing delivers professional-grade reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size holder does the 14.00 mm Twister Xd drill require?
The 14.00 mm diameter shank fits a matching 14.00 mm collet or hydraulic holder; verify your machine spindle accepts that bore size before mounting.
Which installation step is most often missed when fitting this coolant-fed drill?
Connecting the through-spindle coolant line and confirming flow before starting the cycle; running dry will damage the internal channels and the cutting edges.
When should the 14.00 mm Twister Xd drill be replaced?
Replace once flank wear reaches the manufacturer's wear limit or when hole diameter drifts out of tolerance; regrinding is possible but must follow the original 3X geometry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
