M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 13.50 mm
Coolant-fed Twister XD drill creates 13.50 mm holes with internal lubrication
- 3X coolant-fed design clears chips efficiently
- 50 mm diameter suits precise hole sizing
- Twister XD geometry reduces cutting forces
- M.A. Ford construction delivers professional-grade durability
- California Proposition 65 warning informs safe handling
Twister XD 3X Coolant Fed Drill 13.50 mm
This M.A. Ford Twister XD drill is a coolant-fed cutting tool with a 13.50 mm diameter. It is designed for machining operations that require through-tool coolant delivery to the cutting zone. The 3X designation indicates a specific length-to-diameter ratio for deeper hole applications. It arrives in new condition from the manufacturer.
Suited for CNC drilling with internal coolant
This drill suits machinists running CNC machines equipped with through-spindle coolant systems who need to drill deep holes at 13.50 mm diameter. It is not for operators without internal coolant capability, for hand-held drilling, or for applications requiring a different diameter or flute length. The Proposition 65 notice indicates chemical content requiring workplace safety controls.
13.50 mm diameter with 3X coolant-fed geometry
The decisive specification is the 13.50 mm cutting diameter combined with the 3X coolant-fed design. This exact size and internal coolant channel configuration determine whether the tool fits the programmed hole size and machine coolant setup. Verify the 13.50 mm requirement and 3X length ratio against your job specifications before ordering.
Highlights
- 3X coolant-fed design clears chips efficiently
- 50 mm diameter suits precise hole sizing
- Twister XD geometry reduces cutting forces
- M.A. Ford construction delivers professional-grade durability
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 13.50 mm Twister XD 3X coolant-fed drill generate noticeable heat or noise during continuous operation?
The drill is designed with internal coolant channels that carry fluid to the cutting zone, reducing heat build-up and dampening sound during extended use.
What machine spindle or holder is required to run the 2XDCS5315A drill?
A compatible coolant-through spindle or tool holder that accepts the drill shank and delivers pressurised coolant through the internal passages is needed.
Will the 13.50 mm Twister XD 3X drill fit an older CNC lathe with a standard tool turret?
It fits any turret or holder that matches the drill shank diameter and provides through-coolant capability; the 3× diameter flute length suits standard cycle depths.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
