M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 12.90mm 2XDCS5079A
Coolant-fed Twister XD drill bores 12.90 mm holes three diameters deep
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability reaches deeper holes in a single pass
- 90 mm cutting diameter suits precise hole sizing
- Twister Xd geometry reduces cutting forces for smoother operation
- M.A. Ford manufacturing delivers professional-grade tool reliability
What the drill is and who uses it
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a 12.90 mm diameter cutting tool designed for CNC and high-volume machining centres. It suits production engineers and tool-room managers who need reliable hole-making in steel and alloy workpieces. The through-coolant design delivers fluid directly to the cutting zone for consistent chip evacuation and extended tool life.
Who should choose it and who should not
This drill fits shops running rigid CNC machines with through-spindle coolant capability and a need for 12.90 mm holes at 3× diameter depth. It is not for hand-held drilling, machines without internal coolant supply, or applications requiring a different diameter or length-to-diameter ratio.
The specification that decides fit
The critical figure is the 12.90 mm cutting diameter combined with the 3× diameter flute length and coolant-fed geometry. Match this exact size and the machine’s coolant pressure to the tool’s design to achieve the intended performance; any deviation means the drill will not suit the operation.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability reaches deeper holes in a single pass
- 90 mm cutting diameter suits precise hole sizing
- Twister Xd geometry reduces cutting forces for smoother operation
- M.A. Ford manufacturing delivers professional-grade tool reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 12.90mm shank fit the drill chuck I already use for smaller bits?
The 12.90mm shank requires a chuck or collet that accepts that exact diameter; verify your holder's maximum capacity before installing.
How can I confirm the Twister Xd drill is delivering coolant through the tool correctly?
Start the spindle at low speed with coolant on; a steady stream from the drill's internal channels shows the 3X coolant-fed design is functioning.
Does the 2XDCS5079A come with any collets, wrenches or coolant fittings in the package?
The product is supplied as the drill only; holders, collets and coolant connections must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
