M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 12.50 mm
Coolant-fed drill bit, 12.50 mm diameter, designed for 3X depth drilling
- 3X coolant-fed design improves chip evacuation
- 50 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford brand delivers professional tool reliability
- California Prop 65 warning ensures safety awareness
12.50 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 3X is a coolant-fed drill with a 12.50 mm cutting diameter. It is built for metalworking tasks that require internal coolant delivery to the cutting zone. The design targets professional workshops and production environments. This item ships directly from the manufacturer.
Suited for high-volume metal drilling
Machinists who need consistent chip evacuation and temperature control in deep holes will benefit from the coolant-fed design. Buyers who only drill shallow holes in wood or plastic do not need this capability. Those without a machine equipped for through-spindle coolant should look at standard twist drills instead.
Fits standard tool holders
The shank fits common industrial holders so setup follows normal workshop practice. Coolant passages must align with the machine's through-spindle supply or an external feed adapter. Misaligned coolant ports are the most common cause of poor performance. Always verify machine compatibility before first use.
Highlights
- 3X coolant-fed design improves chip evacuation
- 50 mm diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford brand delivers professional tool reliability
- California Prop 65 warning ensures safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 12.50 mm drill need a machine with through-spindle coolant delivery?
Yes, the Twister Xd 3X is a coolant-fed drill and requires a spindle or holder that can supply cutting fluid through the tool centre.
Will the 12.50 mm shank fit my existing ER collets or Weldon holders?
The shank diameter matches the 12.50 mm drill body, so it fits standard collets or Weldon flats made for that size.
How can I confirm the 2XDCS4921A drill is cutting correctly after installation?
Check for steady chip evacuation through the flute, consistent hole diameter at 12.50 mm, and stable spindle load without chatter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
