M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 11.60 mm
A solid-carbide drill with internal coolant channels for 11.60 mm holes
- Twister XD design delivers precise 11.60 mm holes
- 3× coolant-fed operation clears chips for cleaner cuts
- M.A. Ford engineering ensures reliable drilling performance
- California Prop 65 notice included for safety awareness
- Manufacturer-direct supply supports consistent quality control
Twister XD 3X Coolant Drill 11.60 mm
The M.A. Ford Twister XD is a 3X coolant-fed drill with an 11.60 mm diameter. It is built for metal-cutting tasks where internal coolant delivery improves chip evacuation and tool life. The design targets professional workshops and production environments needing consistent hole quality.
Suited for coolant-fed drilling only
This drill suits operators with machines that supply through-tool coolant at the required pressure. It will not suit users limited to external flood coolant or dry drilling. Buyers who need a different diameter or a non-coolant design should select another tool.
Diameter 11.60 mm decides fit
The 11.60 mm cutting diameter is the single specification that determines whether this drill matches the hole size required. Verify the required hole tolerance and machine capability before ordering. A California Proposition 65 warning applies to this product.
Highlights
- Twister XD design delivers precise 11.60 mm holes
- 3× coolant-fed operation clears chips for cleaner cuts
- M.A. Ford engineering ensures reliable drilling performance
- California Prop 65 notice included for safety awareness
- Manufacturer-direct supply supports consistent quality control
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system are required to run the 11.60 mm Twister XD 3X coolant-fed drill?
It needs a spindle that accepts the 11.60 mm shank and a through-spindle coolant supply capable of delivering cutting fluid to the drill's internal channels.
Will the Twister XD 3X 11.60 mm drill fit in the same tool holder as my existing 11.60 mm solid drills?
Yes, the 11.60 mm diameter matches standard holders for that size, but the holder must also provide a sealed coolant connection for the through-tool feed.
How can I confirm the Twister XD 3X 11.60 mm drill is delivering coolant correctly during the first test cut?
Watch for a steady stream of coolant exiting the drill point at the workpiece interface and listen for consistent spindle load without chatter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
