M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 11.00 mm
Coolant-fed drill bit for 11.00 mm holes with three-times diameter depth capacity
- Twister Xd design feeds coolant for efficient chip evacuation
- 00 mm diameter suits precise hole-making tasks
- 3X coolant-fed operation supports consistent drilling performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning included for safety compliance
M.A. Ford Twister Xd 11 mm Drill
The M.A. Ford Twister Xd is a solid-carbide drill with a 3x diameter flute length and through-coolant holes. It is built for CNC machines that can deliver high-pressure coolant directly to the cutting zone. The 11.00 mm diameter suits precision holes in steel, stainless steel and high-temperature alloys. This tool is sold new and ships directly from the manufacturer.
For high-pressure coolant CNC setups
Machinists running rigid CNC centres with through-spindle coolant will gain the chip evacuation and tool life this design provides. Operators limited to external flood coolant or manual drilling machines cannot use the internal channels effectively. Buyers who need a longer 5x or 8x reach should look at a different flute length. The Prop 65 notice also means the drill contains listed chemicals.
11.00 mm diameter with 3x flute length
The 11.00 mm cutting diameter and 3x diameter flute depth define the hole size and maximum depth this drill can produce in a single pass. Through-coolant delivery is required to reach that depth reliably in difficult materials. Verify your machine spindle accepts the shank style and your coolant system meets the pressure needs for this specification.
Highlights
- Twister Xd design feeds coolant for efficient chip evacuation
- 00 mm diameter suits precise hole-making tasks
- 3X coolant-fed operation supports consistent drilling performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system do I need to run this 11.00 mm Twister Xd 3X drill?
It requires a CNC or rigid drill press with through-spindle coolant delivery and a holder that accepts the 11.00 mm shank.
Can I use this drill in an older manual mill that only has flood coolant?
No, the 3X coolant-fed design needs internal coolant pressure through the tool; flood coolant alone will not reach the cutting edges.
How do I verify the drill is performing correctly after the first holes?
Check for consistent chip evacuation through the flutes, steady coolant flow from the tip, and hole diameter holding at 11.00 mm with good surface finish.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
