M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 10.80mm
A 10.80 mm coolant-fed drill designed for three-times-diameter depth drilling
- Twister Xd design optimises 3X drilling performance
- Coolant-fed operation improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford engineering delivers reliable cutting results
- California Proposition 65 warning informs safe handling practices
Twister Xd 3X Coolant-Fed Drill 10.80mm
The M.A. Ford Twister Xd is a coolant-fed drill built for high-performance drilling in demanding materials. Its 10.80 mm diameter suits precision hole-making where chip evacuation and temperature control are critical. Professional machinists and CNC operators use it to maintain tight tolerances and extend tool life in production environments.
Upgrade from standard twist drills
Conventional drills without through-coolant often struggle with heat buildup and chip packing in deep or difficult holes. The Twister Xd 3X design delivers coolant directly to the cutting zone, allowing faster feed rates and longer uninterrupted cuts. The jump is worth it when cycle time, hole quality or tool consumption become bottlenecks on the shop floor.
10.80 mm diameter capacity
This diameter handles medium-size holes in steel, stainless steel and high-temperature alloys with consistent accuracy. Coolant-fed operation provides headroom for deeper holes and tougher alloys where flood coolant alone cannot reach. The drill reaches its limit in very large diameters or materials requiring specialised geometries not covered by this 3X length design.
Highlights
- Twister Xd design optimises 3X drilling performance
- Coolant-fed operation improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford engineering delivers reliable cutting results
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 10.80 mm Twister Xd drill need to fit my tool holder?
The drill has a 10.80 mm cutting diameter; match the holder to that shank size and verify coolant‑through capability.
How do I install the coolant‑fed drill correctly and what step is often missed?
Secure the drill in a coolant‑compatible holder, connect the coolant supply, and ensure the coolant passages are open before starting — skipping the flow check is the common error.
When will the 10.80 mm Twister Xd drill need replacement or maintenance?
Replace the drill when the cutting edges show wear or chipping; no scheduled maintenance is required beyond normal inspection for dullness or damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
