M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 10.00 mm 2XDCS3937A
A 10.00 mm Twister XD drill with 3× coolant-fed design for efficient deep-hole drilling
- Twister XD design drills three times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm diameter suits precise drilling tasks
- M.A. Ford brand backs professional-grade performance
- California Proposition 65 warning notes chemical hazards
M.A. Ford Twister XD 10 mm Drill
The M.A. Ford Twister XD is a coolant-fed drill built for production machining where consistent chip evacuation and tool life matter. It targets CNC operators and job-shop engineers who need a reliable 3×D option for steel and alloy work.
Coolant-Fed 3×D Geometry
The defining specification is the through-coolant 3×D flute design that delivers lubricant directly to the cutting zone. This geometry controls heat and clears chips in deeper holes without Peck cycles, reducing cycle time and protecting the 10.00 mm cutting edges.
Diameter Capacity and Application Limits
At 10.00 mm the drill handles medium-diameter holes in tough materials with strong coolant pressure. It runs out of reach when hole depths exceed the 3×D envelope or when the machine spindle cannot supply the flow rate the internal channels require.
Highlights
- Twister XD design drills three times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm diameter suits precise drilling tasks
- M.A. Ford brand backs professional-grade performance
- California Proposition 65 warning notes chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 10.00 mm diameter mean when the drill is in a machine?
The 10.00 mm diameter produces a hole of that exact size in the workpiece when the tool is held rigidly and fed correctly.
How does the coolant-fed design affect the drilling process?
Internal coolant channels deliver fluid directly to the cutting edges, improving chip evacuation and tool life in deep holes.
What shank style does the 2XDCS3937A use for mounting in a holder?
The drill uses a standard cylindrical shank that fits common hydraulic, shrink-fit or collet holders for 10 mm tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
