M.A. Ford
M.A. Ford Twister XD 2XDCE2283A Coolant Fed Drill 12X-25X 5.80mm
Coolant-fed drill with 12X-25X capability and 5.80mm diameter for precise drilling
- Twister XD design enables 12X-25X drilling depth
- Coolant-fed operation improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing delivers professional-grade reliability
- California Prop 65 notice informs safe handling practices
Application scope
The M.A. Ford Twister XD 2XDCE2283A is a coolant-fed drill sized at 5.80 mm and rated for 12X to 25X diameter depths. It serves machinists who need a single tool for deep-hole drilling in a variety of materials.
Build integration
The coolant-fed design channels fluid through the tool to the cutting zone, removing the need for external flood coolant in many setups. This reduces chip-packing risk and frees up spindle time otherwise spent on peck cycles.
Regulatory note
The product carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm. Shops must handle the drill with standard protective equipment and maintain safety data sheets to meet workplace compliance.
Highlights
- Twister XD design enables 12X-25X drilling depth
- Coolant-fed operation improves chip evacuation and tool life
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing delivers professional-grade reliability
- California Prop 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is the maximum drilling depth range supported by the 12X-25X capability?
The 12X-25X designation indicates a drilling depth range of 12 to 25 times the 5.80 mm diameter.
How much heat does the coolant-fed system manage during extended drilling sessions?
The integrated coolant-fed design channels fluid directly to the cutting zone to control temperature during prolonged operation.
What machine spindle interface is required to run this 5.80 mm coolant-fed drill?
The drill requires a machine spindle with through-coolant capability and a holder that accepts a 5.80 mm shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
