M.A. Ford
M.A. Ford Twister Brad and Spur Drill 9.00 mm 20735430
9.00 mm Twister brad and spur drill bit for clean, precise wood drilling
- 00 mm diameter drills precise holes cleanly
- Brad and spur design reduces wandering on entry
- M.A. Ford quality ensures reliable cutting performance
- Twister geometry improves chip evacuation during use
- California Proposition 65 warning informs safe handling practices
9.00 mm Twister Brad and Spur Drill
The M.A. Ford Twister Brad and Spur Drill is a 9.00 mm cutting accessory designed for precision boring in wood and similar materials. Its brad point centres the hole cleanly while the spur edges shear fibres for a smooth finish. The tool suits joinery, cabinetry and general workshop tasks where accurate hole placement matters. It is supplied new and ready for immediate use.
Installation and common issues
The drill fits standard three-jaw chucks on handheld drills or drill presses; secure it firmly and run at a speed appropriate for the workpiece material. Applying steady pressure without forcing prevents the brad point from wandering or the spurs from burning the wood. The most frequent problem is dulling caused by hitting hidden nails or knots, which ruins the cutting geometry and requires replacement.
Compatibility checks before ordering
Verify that your chuck accepts a 9.00 mm shank and that your machine can run at the lower speeds recommended for brad-point bits. Confirm the workpiece thickness does not exceed the flute length available on this model. Buyers who need a different diameter or a longer reach should look for an alternative size. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- 00 mm diameter drills precise holes cleanly
- Brad and spur design reduces wandering on entry
- M.A. Ford quality ensures reliable cutting performance
- Twister geometry improves chip evacuation during use
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the 9.00 mm Twister Brad and Spur Drill cuts cleanly after setup?
Drill a test hole in scrap wood; the brad point should centre without wandering and the spur should shear fibres for a clean entry hole.
What comes in the box with the 20735430 drill and what must I source separately?
The box contains the 9.00 mm Twister Brad and Spur Drill only; a compatible drill chuck or quick-change adapter is not included and must be purchased separately.
Which capacity of the Twister Brad and Spur Drill should I choose for a 9.00 mm hole?
Select the 9.00 mm variant — the diameter is fixed per part number, so choose the size that matches the required hole diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
