M.A. Ford
M.A. Ford Twister Brad and Spur Drill 5.00 mm 20719680
A 5.00 mm Twister Brad and Spur drill bit for precision woodworking tasks
- 00 mm brad and spur drill creates clean holes in wood
- Twister flute design clears chips efficiently during drilling
- M.A. Ford manufacturing ensures professional-grade tool quality
- 20719680 model fits standard drill chucks securely
- California Prop 65 warning informs safe handling practices
Twister Brad and Spur Drill 5.00 mm
The M.A. Ford Twister Brad and Spur Drill is a 5.00 mm cutting tool designed for precise hole-making in wood and similar materials. It suits woodworkers, cabinet makers and general tradespeople who need clean entry and exit points without splintering. The brad point centres the drill while the spurs score the fibres for a neat bore.
Installation and common issues
The drill fits standard three-jaw chucks on corded or cordless drill drivers. Tighten the chuck securely on the shank to prevent slippage during use. Running at excessive speed or applying heavy feed pressure can overheat the cutting edges and dull the spurs prematurely. Always clear chips frequently to avoid binding and overheating.
Practical limits of the brad and spur design
The brad and spur geometry excels in wood but is not suited for metal, masonry or abrasive composites. The 5.00 mm diameter fixes the hole size; the drill cannot be used for other diameters. Cutting depth is limited by the flute length of the bit itself. California Proposition 65 warnings apply to this product.
Highlights
- 00 mm brad and spur drill creates clean holes in wood
- Twister flute design clears chips efficiently during drilling
- M.A. Ford manufacturing ensures professional-grade tool quality
- 20719680 model fits standard drill chucks securely
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I confirm the 5.00 mm Twister Brad and Spur Drill cuts cleanly after fitting it?
Drill a test hole in scrap wood; a correctly sharpened 5.00 mm bit should produce a smooth entry, minimal tear-out and a precise 5.00 mm diameter.
What comes with the 20719680 drill and what must I supply?
The package contains the single 5.00 mm Twister Brad and Spur Drill; you provide the drill chuck or driver and any workpiece clamps.
Which version of the M.A. Ford Twister Brad and Spur Drill should I select for a 5.00 mm hole?
Choose the 20719680 model, which is manufactured specifically for a 5.00 mm cutting diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
