M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill No 33 22911300
Three-flute Twister Al 5X drill in size No 33 cuts aluminium efficiently with improved chip evacuation
- Three-flute design improves chip evacuation in aluminium
- 5× diameter drilling depth extends reach in deep holes
- Size No 33 matches precise pilot-hole requirements
- M.A. Ford manufacturing ensures consistent cutting geometry
- California Proposition 65 warning discloses regulated chemical content
Twister Al 5X 3 Flute Drill No 33
The M.A. Ford Twister Al 5X 3 Flute Drill No 33 is a cutting tool designed for drilling aluminium and similar non-ferrous materials. It features a three-flute geometry optimised for chip evacuation in these specific applications. This item is supplied new and carries the manufacturer part number 22911300.
Sustained drilling performance
The three-flute design promotes continuous chip removal during extended drilling cycles, reducing the tendency for clogging in soft, ductile alloys. This geometry helps maintain consistent cutting action over longer periods compared to standard two-flute drills. The 5X designation indicates a length-to-diameter ratio suited for deeper holes.
California Proposition 65 compliance
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Buyers requiring materials without such substances should consider alternative tooling options. The warning applies to the drill itself as supplied by the manufacturer.
Highlights
- Three-flute design improves chip evacuation in aluminium
- 5× diameter drilling depth extends reach in deep holes
- Size No 33 matches precise pilot-hole requirements
- M.A. Ford manufacturing ensures consistent cutting geometry
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 22911300 Twister Al 5X generate noticeable heat or vibration during prolonged drilling in aluminium?
The 3-flute geometry is designed for efficient chip evacuation in aluminium, which reduces friction and heat buildup during extended use.
What tool holder or chuck size is required to secure the No 33 shank?
A standard drill chuck or collet capable of gripping the No 33 diameter shank is needed to run the 22911300.
Can the 22911300 be used in an older drill press without speed control issues?
The drill operates effectively at conventional speeds for aluminium; ensure the press can reach the appropriate RPM range for the No 33 size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
