M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 3/16 22918750
Three-flute carbide drill for aluminium, 5× diameter reach, 3/16 inch size
- 3-flute geometry improves chip evacuation in aluminium
- 5× diameter reach allows deeper holes without pecking
- 3/16 inch diameter suits common fastener sizes
- New condition ensures full factory performance
- Manufacturer part number 22918750 simplifies reordering
M.A. Ford Twister Al 5X Drill
The M.A. Ford Twister Al 5X is a three-flute drill bit sized at 3/16 inch. It is designed for drilling aluminium and similar non-ferrous materials in workshop and production environments. The 5X designation marks it as a high-performance tool for demanding applications. Buyers who need a different diameter or a cobalt steel substrate cannot use this item.
Three-flute geometry constraints
The three-flute design improves chip evacuation in sticky aluminium alloys compared with two-flute alternatives. It requires a rigid machine spindle and stable workholding to prevent chatter at higher feed rates. Hand-held drilling or worn chucks will reduce hole accuracy and tool life. The geometry is not suited for deep-hole drilling beyond standard flute length.
Capacity and material limits
The 3/16 inch cutting diameter handles typical sheet-metal, extrusion and plate thicknesses found in general fabrication. It runs out when material hardness exceeds the design range for aluminium-specific geometry or when hole depth demands coolant-through capability not present on this tool. The item carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- 3-flute geometry improves chip evacuation in aluminium
- 5× diameter reach allows deeper holes without pecking
- 3/16 inch diameter suits common fastener sizes
- New condition ensures full factory performance
- Manufacturer part number 22918750 simplifies reordering
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Twister Al 5X drill size should I choose for a 3/16 inch hole?
The 22918750 model is a 3/16 inch diameter drill, so select this exact size for that hole requirement.
What does the 5X designation mean when using this drill in a machine?
The 5X indicates a five-times-diameter flute length, giving deeper drilling capability in a single pass.
What shank standard does the 22918750 use and what does it limit?
It uses a standard straight shank sized to the 3/16 inch diameter, which fits common drill chucks and collets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
