M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 2.00Mm 22907870
Three-flute 2.00 mm drill designed for aluminium with five-times diameter reach
- 3-flute design reduces vibration for smoother holes
- 5x diameter reach drills deeper in one pass
- 00 mm diameter suits fine precision work
- Twister Al geometry optimised for aluminium alloys
- California Prop 65 warning informs safe handling
Twister Al 5X 3 Flute Drill 2.00Mm
The M.A. Ford Twister Al 5X is a three-flute drill designed for aluminium and similar non-ferrous materials. Its 2.00 mm diameter suits precise hole-making in automotive and general workshop tasks. The 5X designation indicates a five-times-diameter flute length for deeper drilling in a single pass. It is intended for machinists and technicians who need clean, accurate holes in soft alloys.
Thermals noise and power draw
Heat generation stays low because the three-flute geometry evacuates chips efficiently in aluminium. Cutting forces remain moderate so the machine spindle runs quietly and draws less current than with standard two-flute drills. No coolant-through channels are present so external flood or mist coolant manages temperature at the cutting zone. The tool runs cool enough for extended production runs without frequent pauses.
Build fit and workflow
The straight shank fits standard drill chucks and collets without adapters. A rigid machine setup and secure workpiece clamping are required to prevent vibration at the 5X length. The drill frees up cycle time by reducing peck cycles compared with shorter-flute tools. Orders of 75 or more ship free and the item ships directly from the manufacturer. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- 3-flute design reduces vibration for smoother holes
- 5x diameter reach drills deeper in one pass
- 00 mm diameter suits fine precision work
- Twister Al geometry optimised for aluminium alloys
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do you install the 2.00 mm Twister Al 5X drill in a drill chuck and what step is often missed?
Insert the 2.00 mm shank fully into the chuck, tighten all three jaws evenly, then verify the bit runs true before starting the cut.
What maintenance or replacement will the 22907870 drill need after extended use?
The three cutting edges will dull; resharpen or replace the drill once hole quality drops or thrust force rises noticeably.
What limit appears first when the 2.00 mm Twister Al drill runs continuously in aluminium?
Heat builds quickly in the small 2.00 mm body, so cutting speed must be reduced or coolant applied to avoid premature wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
