M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 10.20 mm 22940160
A 10.20 mm three-flute drill designed for aluminium, offering five-times-diameter reach
- Three-flute geometry clears chips efficiently in aluminium
- 5× diameter reach drills deeper holes without pecking
- 20 mm diameter suits precise metric hole sizes
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 notice included for regulatory awareness
M.A. Ford Twister Al 5X 3 Flute Drill
The M.A. Ford Twister Al 5X is a 10.20 mm diameter drill bit with a three-flute design. It targets machinists and fabricators who need a dedicated tool for high-performance drilling in aluminium and similar non-ferrous materials. The 5X designation indicates a specialised geometry optimised for this workpiece group.
Three-flute geometry and aluminium focus
The three-flute configuration changes chip evacuation compared with standard two-flute drills, providing additional cutting edges that can increase feed rates in aluminium. This geometry helps break chips and reduce packing in the flutes, which supports smoother hole walls and longer tool life when machining soft, gummy alloys.
10.20 mm capacity and application limits
The fixed 10.20 mm diameter suits through-hole and blind-hole operations in aluminium where that exact size is required. It is not intended for ferrous metals, composites or hardened steels, where the specialised point geometry and coating would wear rapidly. Buyers needing other diameters or a broader material range must select different tooling.
Highlights
- Three-flute geometry clears chips efficiently in aluminium
- 5× diameter reach drills deeper holes without pecking
- 20 mm diameter suits precise metric hole sizes
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 notice included for regulatory awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 10.20 mm 3-flute drill need resharpening when used in aluminium?
Resharpening frequency depends on the aluminium alloy, feed rate and coolant used; the 3-flute geometry distributes wear evenly, so intervals are typically longer than with 2-flute drills.
What limits continuous drilling depth with the 5X length-to-diameter ratio?
The 5X design allows holes up to roughly five times the 10.20 mm diameter; beyond that, chip evacuation and heat buildup become the practical limits.
Does the 22940160 drill generate excessive heat or noise during all-day CNC runs?
The 3-flute Twister Al geometry is optimised for aluminium, reducing cutting forces and heat; with proper coolant, noise and temperature stay manageable in extended production cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
