M.A. Ford
M.A. Ford Tuffcut GP 2 Flute Ball Nose End Mill 25.0 mm 15098430
A 25.0 mm two-flute ball nose end mill for contour milling and profiling tasks
- Precision contouring with 2 flute ball nose design
- 0 mm diameter handles large radius work
- M.A. Ford Tuffcut GP series built for general purpose milling
- New condition ensures full tool life from first use
- California Proposition 65 warning informs safe handling practices
Tuffcut GP 25.0 mm Ball Nose End Mill
The M.A. Ford Tuffcut GP is a two-flute ball nose end mill with a 25.0 mm cutting diameter. It is designed for general-purpose milling in ferrous and non-ferrous materials. Machinists and fabricators use it for contouring, profiling and 3D surface finishing on CNC or manual milling machines. The tool suits shops that need a reliable cutter for everyday profiling work.
Solid Carbide Construction and Shank Mounting
The cutter is made from solid carbide for wear resistance and rigidity during heavy cuts. Its straight shank fits standard ER collets, Weldon flats or shrink-fit holders without adapters. The two-flute geometry provides large chip gullets for efficient evacuation in deep pockets or slots. Operators can run higher feed rates with less risk of chip packing.
25.0 mm Diameter Defines Application Range
The 25.0 mm diameter determines the minimum internal radius and the maximum step-over for finishing passes. Shops machining smaller features or tight corners must select a smaller tool. Buyers needing a different flute count, coating or length series should look elsewhere. This item carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- Precision contouring with 2 flute ball nose design
- 0 mm diameter handles large radius work
- M.A. Ford Tuffcut GP series built for general purpose milling
- New condition ensures full tool life from first use
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is the cutting diameter of the 15098430 Tuffcut GP end mill?
The cutting diameter is 25.0 mm, which determines the maximum width of cut in a single pass.
What shank diameter does the 15098430 end mill require in the tool holder?
The shank diameter matches the 25.0 mm cutting diameter, so a 25.0 mm collet or end-mill holder is needed.
How should the 15098430 ball nose end mill be secured to prevent pull-out during heavy cuts?
Clamp the full shank length in a precision collet or Weldon flat holder, and torque the holder nut to the machine builder's specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
