M.A. Ford
M.A. Ford Tuffcut Al 2 Flute End Mill Finisher 6.0Mm 13623620
A 6.0 mm two-flute end mill designed for finishing aluminium workpieces
- TypeCutting Tools
- Tuffcut Al geometry delivers clean aluminium finishing
- Two-flute design optimises chip evacuation in non-ferrous metals
- 0 mm cutting diameter suits precision milling tasks
- M.A. Ford manufacturing ensures consistent tool performance
- California Proposition 65 warning informs safe handling practices
M.A. Ford 6.0mm end mill
The M.A. Ford Tuffcut Al 2 Flute End Mill Finisher 6.0Mm is a cutting tool designed for finishing aluminium workpieces. It suits machinists and fabricators who need clean surface results on non-ferrous materials. The two-flute geometry supports efficient chip evacuation during high-speed operations. This item is supplied new from the manufacturer.
Upgrading from general-purpose cutters
This finisher replaces general-purpose end mills when surface quality on aluminium is the priority. The specialised flute design reduces built-up edge and improves finish compared to standard tooling. The jump is worth it when secondary finishing passes add cycle time or when hand polishing is currently required. Orders of $75 or more ship free directly from the manufacturer.
Sustained aluminium finishing
Under sustained load the tool maintains dimensional stability while producing consistent surface texture on aluminium alloys. The two-flute configuration manages heat and chip flow during extended profiling or slotting passes. California Proposition 65 notices apply: the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm.
Highlights
- Tuffcut Al geometry delivers clean aluminium finishing
- Two-flute design optimises chip evacuation in non-ferrous metals
- 0 mm cutting diameter suits precision milling tasks
- M.A. Ford manufacturing ensures consistent tool performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What size collet or holder is required for the 6.0 mm shank?
Use a 6.0 mm collet or hydraulic holder; ensure the tool shank is clean and fully seated before tightening to avoid run-out.
How should the end mill be secured in the machine spindle to prevent slipping?
Insert the 6.0 mm shank fully into a matched collet, torque the nut to the holder maker’s spec, and verify zero axial play before starting the cut.
When should the cutter be replaced based on wear or edge condition?
Replace the tool when flank wear exceeds normal limits for aluminium finishing, when chipping appears on the two flutes, or when surface finish degrades beyond tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
