M.A. Ford
M.A. Ford Tuffcut Al 2 Flute End Mill 7/16 135B43751
Two-flute end mill cuts aluminium with a 7/16 diameter for smooth milling
- TypeCutting Tools
- Designed for aluminium machining with two-flute geometry
- TuffCut Al series built for non-ferrous material removal
- 7/16 inch cutting diameter suits medium milling tasks
- New condition ensures full factory performance from first use
- California Proposition 65 notice lists chemical hazard warnings
M.A. Ford Tuffcut Al End Mill
This M.A. Ford Tuffcut Al 2 Flute End Mill is a solid-carbide cutting tool designed for aluminium and other non-ferrous materials. The two-flute geometry provides generous chip space to reduce packing during high-speed machining. It is intended for CNC milling operations where clean finishes and fast material removal are required.
Machinists cutting aluminium and non-ferrous alloys
The tool suits machinists producing slots, pockets and profiles in aluminium, brass, copper or plastic on CNC mills or routers. It is not for builders who need a drill bit, a tap or a cutter for hardened steel, stainless steel or titanium alloys. Buyers requiring a different flute count, a coated variant or a larger shank diameter should look at other tooling options.
7/16 inch cutting diameter
The single specification that decides fitment is the 7/16 inch cutting diameter, which must match the programmed tool path and the feature size on the part. Verify the shank diameter and overall length against your machine’s tool holder and clearance before ordering.
Highlights
- Designed for aluminium machining with two-flute geometry
- TuffCut Al series built for non-ferrous material removal
- 7/16 inch cutting diameter suits medium milling tasks
- New condition ensures full factory performance from first use
- California Proposition 65 notice lists chemical hazard warnings
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What shank standard does the 135B43751 end mill use, and what tool holders accept it?
The cutter has a standard straight shank sized for 7/16 inch collets and end-mill holders, so it fits any ER, TG or Weldon holder that matches that diameter.
What minimum clearance should the spindle and tool changer allow for this 7/16 inch diameter cutter?
Allow at least 7/16 inch radial clearance plus the flute length; verify your machine’s tool-change envelope and spindle nose gap before loading.
How do you install the 135B43751 in a collet chuck without causing run-out?
Clean the shank and collet bore, insert the shank to the full gripping length, then torque the collet nut to the holder manufacturer’s spec — partial insertion is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
