M.A. Ford
M.A. Ford HPDCR2500A Twister HPD Coolant High-Performance Drill 5X 1/4
High-performance coolant drill with 5x capability for precision drilling tasks
- High-performance drilling with Twister HPD coolant design
- 5X flute geometry improves chip evacuation during operation
- M.A. Ford manufacturing quality ensures reliable tool performance
- 1/4 inch diameter suits precision drilling applications
- California Proposition 65 warning for chemical safety awareness
High-Performance Drill for Metalworking
The M.A. Ford HPDCR2500A Twister HPD is a coolant-fed drill designed for high-efficiency drilling in demanding applications. It targets machinists and fabricators who require precise, deep-hole capability in a single pass.
5X Diameter Drilling Depth Capability
This drill achieves a 5X diameter depth ratio, allowing deep-hole drilling without pecking cycles. The 1/4 inch diameter suits common fastener and clearance holes in steel and alloy workpieces.
Coolant-Through Design Manages Heat
Internal coolant channels deliver fluid directly to the cutting zone, reducing thermal buildup and extending tool life. Efficient chip evacuation lowers cutting forces and operational noise during continuous drilling cycles.
Highlights
- High-performance drilling with Twister HPD coolant design
- 5X flute geometry improves chip evacuation during operation
- M.A. Ford manufacturing quality ensures reliable tool performance
- 1/4 inch diameter suits precision drilling applications
- California Proposition 65 warning for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep does the 5X drill point reach in a single pass?
The 5X designation means the flute length allows drilling up to five times the 1/4 inch diameter, giving roughly 1-1/4 inches of depth per plunge.
What shank standard does the HPDCR2500A use for tool-holder grip?
It has a straight 1/4 inch shank that fits standard ER collets, Weldon flats or three-jaw chucks without an adapter.
How much clearance is needed behind the spindle for the coolant-through body?
The through-coolant passage adds minimal overhang, so any holder with at least 2500 mm of draw-bar travel will accommodate it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
