M.A. Ford
M.A. Ford HPDCR1875A Twister HPD Coolant Drill 5X 3/16
Coolant-fed high-performance drill with 5× diameter capability in 3/16 size
- Drills five diameters deep for efficient holes
- 3/16 inch diameter suits precise applications
- Twister HPD design improves coolant delivery
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm
Twister HPD Coolant Drill 3/16
The M.A. Ford HPDCR1875A Twister HPD Coolant Drill 5X is a 3/16 inch high-performance drill designed for precision hole-making in demanding materials. It suits machinists and maintenance technicians who need reliable coolant-through capability for deep or difficult drilling operations. This new tool arrives ready for immediate use in professional workshops.
Installation and common issues
The drill fits standard 3/16 inch tool holders and connects directly to machine coolant systems for through-spindle delivery. Most problems arise when coolant pressure falls below the level needed to clear chips from deep holes, causing premature wear or breakage. Proper alignment in the spindle and verified coolant flow prevent the majority of field failures.
Practical limits of coolant-through drilling
Coolant-through drilling extends tool life and hole quality in deep cavities, yet it remains bound by machine spindle speed and available coolant pressure. The 5X diameter-to-depth ratio defines the practical reach for this 3/16 inch diameter without pecking cycles. Operators must also observe the California Proposition 65 warning regarding chemical exposure during use.
Highlights
- Drills five diameters deep for efficient holes
- 3/16 inch diameter suits precise applications
- Twister HPD design improves coolant delivery
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the HPDCR1875A is drilling correctly after setup?
Verify that coolant flows through the internal channels and the 5X flute geometry evacuates chips cleanly at the 3/16 diameter.
What comes with the Twister HPD drill and what must I supply separately?
The drill itself is supplied; you must provide a compatible coolant system, tool holder and workpiece clamping.
Which capacity of the HPDCR1875A should I choose for my application?
The 3/16 inch diameter with 5X flute length is the single variant offered under this part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
