M.A. Ford
M.A. Ford HPDCR1590A Twister HPD coolant drill 5X No 21
A coolant-fed drill bit designed for high-performance drilling, size 21
- Designed for high-performance drilling with coolant capability
- Twister HPD series built for precision hole-making
- 5X drill geometry supports deeper cuts efficiently
- Model HPDCR1590A identifies exact specification for reordering
- California Prop 65 notice included for safety compliance
M.A. Ford HPDCR1590A Twister HPD Drill
The M.A. Ford HPDCR1590A Twister HPD coolant drill is a specialised cutting tool designed for high-performance drilling applications. It features an integrated coolant delivery system to manage heat during operation. This drill is intended for professional machinists and fabricators who require precise hole-making in demanding materials.
Suited for coolant-fed drilling; not for dry use
This tool suits workshops equipped with machine tools that support through-spindle or external coolant feed at the required pressure. It is not for operators who only have access to dry drilling setups or hand-held equipment without coolant capability. Buyers needing a standard twist drill without internal coolant channels should consider a different product line.
Fits CNC machines with coolant-through spindles
The drill installs directly into a compatible tool holder on a CNC machining centre or similar automated equipment that provides coolant through the spindle. Its integrated channels free the operator from managing external coolant nozzles aimed at the cut zone. The design reduces chip welding and improves evacuation in deep-hole drilling cycles. P65 warnings apply.
Highlights
- Designed for high-performance drilling with coolant capability
- Twister HPD series built for precision hole-making
- 5X drill geometry supports deeper cuts efficiently
- Model HPDCR1590A identifies exact specification for reordering
- California Prop 65 notice included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle is needed to run the Twister HPD coolant drill 5X No 21?
The drill is built for high-performance coolant-through spindles that accept a number-21 shank and can deliver the pressure required for 5X drilling cycles.
Can the HPDCR1590A be used in an older drill press that only takes straight-shank bits?
No — the number-21 shank and internal coolant passage require a compatible holder and a machine equipped for through-spindle coolant delivery.
How do I confirm coolant is flowing correctly through the HPDCR1590A after installation?
Start the spindle at low speed with coolant on; a steady stream from the drill’s tip and no leakage at the holder interface show the internal passage is clear and sealed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
