M.A. Ford
M.A. Ford HPDCR1562A Twister HPD coolant high-performance drill 5X 5/32
High-performance coolant drill with 5X design for efficient drilling in demanding applications
- Twister HPD design enables high-performance coolant drilling
- 5X capability supports deeper hole applications
- 5/32 inch diameter suits precision machining tasks
- California Proposition 65 warning indicates chemical safety awareness
- M.A. Ford brand delivers professional-grade tool reliability
Twister HPD 5X Drill 5/32
The M.A. Ford HPDCR1562A Twister HPD coolant high-performance drill is a 5X diameter tool sized at 5/32 inch. It is built for production drilling where through-coolant delivery improves chip evacuation and tool life. Machinists running CNC centres or rigid manual machines will find it suited to deep-hole work in steel and alloy.
Replacing Standard 3X Drills
Stepping up from a conventional 3X drill is worth it when hole depth exceeds three diameters and coolant pressure is available. The 5X length reduces peck cycles and improves straightness, while the coolant channel flushes chips continuously. Without adequate coolant flow or machine rigidity the advantage disappears.
For High-Volume Deep Holes
This drill suits shops cutting repeated deep holes in tough materials where cycle time and tool cost matter. It is not for occasional hand-held use, for machines without through-spindle coolant, or for diameters outside the 5/32 inch size. Buyers needing larger or smaller diameters should select the matching variant.
Highlights
- Twister HPD design enables high-performance coolant drilling
- 5X capability supports deeper hole applications
- 5/32 inch diameter suits precision machining tasks
- California Proposition 65 warning indicates chemical safety awareness
- M.A. Ford brand delivers professional-grade tool reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 5/32-inch Twister HPD drill require in the chuck?
The drill has a 5/32-inch shank, so it fits any standard chuck that accepts that diameter.
How do you engage the through-coolant feature when installing the drill in a CNC holder?
Seat the drill fully in a coolant-fed holder, align the internal coolant port with the spindle feed, and torque the retention nut to the holder manufacturer's specification.
When should the HPDCR1562A drill be replaced based on wear?
Replace the drill when the corner radius shows measurable wear, the coolant hole exits clog, or hole diameter exceeds the 5/32-inch tolerance band.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
