M.A. Ford
M.A. Ford HPDCR 1560A Twister HPD coolant drill 15.60 mm
A coolant-fed drill bit with 15.60 mm diameter for high-performance drilling
- 5× flute geometry speeds chip removal
- 60 mm diameter matches exact hole size
- Through-coolant design reduces heat build-up
- M.A. Ford brand backs professional-grade quality
- New condition ensures full tool life
Twister HPD coolant drill 15.60 mm
The M.A. Ford HPDCR 1560A is a solid-carbide coolant drill designed for high-performance drilling in steel and cast iron. Its internal coolant channels deliver lubricant directly to the cutting zone for improved chip evacuation. The 15.60 mm diameter suits precise hole-making in production and maintenance environments.
Replaces standard twist drills without coolant feed
Conventional drills rely on external flood coolant which often fails to reach deep holes. This tool upgrades the process by supplying coolant through the shank, reducing heat at the cutting edges and extending tool life. The jump is worth it when drilling depths exceed three diameters or when cycle time must be shortened.
Sustained load keeps cutting edges cool
Under continuous operation the internal coolant flow maintains stable temperatures at the drill point, preventing thermal softening of the carbide. Chip evacuation remains consistent because coolant pressure flushes swarf from the flutes. This steadiness protects hole tolerance and surface finish during long production runs.
Highlights
- 5× flute geometry speeds chip removal
- 60 mm diameter matches exact hole size
- Through-coolant design reduces heat build-up
- M.A. Ford brand backs professional-grade quality
- New condition ensures full tool life
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 15.60 mm Twister HPD coolant drill require in the holder?
The drill has a 15.60 mm cutting diameter and a matching 15.60 mm cylindrical shank, so the holder must accept a 15.60 mm shank.
How do you engage the internal coolant feed when installing this 5×D drill?
Align the drill's coolant through-hole with the machine's coolant port, seat the shank fully, then activate coolant pressure before spindle start to avoid dry entry.
When should the 15.60 mm Twister HPD drill be replaced or reconditioned?
Replace or regrind when flank wear reaches the manufacturer's limit, when hole diameter drifts outside tolerance, or when thrust force rises sharply during 5×D drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
