M.A. Ford
M.A. Ford HPDCR 1540A Twister HPD Coolant Drill 15.40 mm
A 15.40 mm coolant-fed drill designed for high-performance drilling applications
- 40 mm diameter for precise hole sizing
- 5× coolant-through design improves chip evacuation
- HPD Twister geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
- California Proposition 65 compliance disclosed upfront
M.A. Ford 15.40 mm Coolant Drill
The M.A. Ford HPDCR 1540A Twister HPD is a coolant-fed drill engineered for high-performance drilling applications. It features a 15.40 mm diameter and a 5X length-to-diameter ratio designed for deep-hole accuracy. The tool is supplied new and ships directly from the manufacturer.
Suited for deep-hole drilling in metal
This drill suits machinists and fabricators who require through-coolant capability for chip evacuation and temperature control in deep bores. It is not intended for hand-held use or for shallow holes where a standard twist drill is sufficient. Buyers needing a non-coolant design or a different diameter should select another tool.
15.40 mm diameter with 5X ratio
The defining specification is the 15.40 mm cutting diameter combined with the 5X length-to-diameter ratio. This determines the maximum drill depth and the required spindle clearance for the workpiece. Verify that your machine and fixture accommodate this specific geometry before purchase.
Highlights
- 40 mm diameter for precise hole sizing
- 5× coolant-through design improves chip evacuation
- HPD Twister geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
- California Proposition 65 compliance disclosed upfront
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 15.40 mm drill generate noticeable heat during extended use?
The Twister HPD coolant-through design routes fluid directly to the cutting zone, keeping the 15.40 mm tool cooler during long drilling cycles.
What machine setup is required to use the coolant-fed 15.40 mm drill?
A CNC or drill press with through-spindle coolant delivery and a 15.40 mm capacity chuck is needed to run this drill.
Will the 15.40 mm coolant drill fit in my older tool holder?
The shank follows standard industry dimensions for 15.40 mm high-performance drills, so it fits existing holders that accept that diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
