M.A. Ford
M.A. Ford HPDCR 1360A Twister HPD Coolant Drill 5X 13.60 mm
A 13.60 mm coolant-fed drill bit designed for high-performance drilling applications
- Precision drilling with 5X coolant-through design
- 60 mm diameter suits exacting hole sizes
- M.A. Ford manufacturing ensures tool reliability
- California Proposition 65 warning for user awareness
- New condition guarantees full factory performance
M.A. Ford HPDCR 1360A Twister HPD Coolant Drill
The M.A. Ford HPDCR 1360A Twister HPD Coolant Drill is a high-performance cutting tool designed for precision drilling operations. It features a 5X diameter drilling depth capability and a 13.60 mm diameter. This drill is engineered for applications requiring coolant-through functionality to enhance tool life and hole quality. It serves machinists and manufacturing professionals needing reliable deep-hole drilling performance.
Suited for high-performance drilling in demanding
This drill suits machinists and manufacturers performing deep-hole drilling up to five times the diameter in materials requiring coolant delivery. It is not for buyers who need a drill diameter other than 13.60 mm or a drilling depth ratio different from 5X. It is also not for users without coolant-through machine capability or those requiring a tool without the Proposition 65 chemical warning.
13.60 mm diameter with 5X depth capability
The decisive specification is the 13.60 mm cutting diameter combined with the 5X diameter depth rating. This defines the hole size and maximum reach achievable in a single operation. Buyers must verify their machine spindle accommodates this specific diameter and that the 5X depth meets their hole-depth requirements. The Proposition 65 warning for cancer and reproductive harm also applies.
Highlights
- Precision drilling with 5X coolant-through design
- 60 mm diameter suits exacting hole sizes
- M.A. Ford manufacturing ensures tool reliability
- California Proposition 65 warning for user awareness
- New condition guarantees full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size chuck is needed for the 13.60 mm shank on this HPDCR 1360A drill?
Use a chuck that accepts a 13.60 mm diameter shank; a standard 1/2 inch or 13 mm chuck will not hold this drill securely.
Which step is most often missed when mounting this coolant-fed drill in a CNC holder?
Align the internal coolant channel with the holder's coolant port before tightening, otherwise coolant cannot reach the cutting zone.
When should the Twister HPD coolant drill be replaced based on wear?
Replace the drill when the corner radius shows visible rounding or when hole diameter exceeds tolerance, as the 5X design relies on sharp edges for chip evacuation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
