M.A. Ford
M.A. Ford HPDCR 1340A Twister HPD coolant drill 13.40 mm
Twister HPD coolant drill creates precise 13.40 mm holes with through-coolant delivery for high-performance drilling
- 40 mm diameter drills precise holes
- 5× diameter flute length reaches deep features
- Twister HPD geometry improves chip evacuation
- Coolant-through design extends tool life
- M.A. Ford quality ensures reliable performance
13.40 mm coolant drill for high-performance drilling
The M.A. Ford HPDCR 1340A Twister HPD drill is a 13.40 mm high-performance coolant drill built for 5X diameter drilling depth. It targets machinists and maintenance teams who need accurate deep-hole drilling in steel and alloys. The through-coolant design delivers lubricant directly to the cutting zone for chip evacuation and tool life.
Installation fits standard holders.
The straight shank fits common ER collets, Weldon flats or hydraulic chucks without adapters. Most issues arise from insufficient coolant pressure or flow, which starves the cutting edges and causes premature wear. Verify that the machine spindle and coolant system seal correctly at the shank to prevent leakage.
Check spindle speed range
Ensure the machine can run the low RPM and high feed rates this geometry requires without stalling. Confirm the coolant filtration rating matches the through-tool passages to avoid blockage. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- 40 mm diameter drills precise holes
- 5× diameter flute length reaches deep features
- Twister HPD geometry improves chip evacuation
- Coolant-through design extends tool life
- M.A. Ford quality ensures reliable performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the 13.40 mm drill is cutting correctly after setup?
Verify hole diameter matches 13.40 mm and check for consistent coolant flow through the internal channels during operation.
What comes with the HPDCR 1340A and what must I source separately?
The drill body is supplied; you will need a compatible tool holder, coolant supply system and appropriate workholding for your machine.
When should I select the 13.40 mm version over other diameters?
Choose the 13.40 mm drill when your hole specification calls for that exact diameter and a 5× depth-to-diameter ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
