M.A. Ford
M.A. Ford HPDCR 1330A Twister HPD coolant drill 13.30mm
A 13.30 mm high-performance coolant drill with 5x capability for efficient drilling
- Twister HPD design delivers high-performance coolant drilling
- 30 mm diameter suits precise hole-making tasks
- 5x drilling capability enables deeper cuts efficiently
- M.A. Ford brand ensures professional-grade tool reliability
- California Proposition 65 compliance provides safety awareness
Precision coolant drill for demanding materials
The M.A. Ford HPDCR 1330A Twister HPD is a 13.30 mm high-performance coolant drill built for five-times-diameter drilling depth. It targets machine shops and fabricators who need reliable hole-making in tough alloys where coolant delivery through the tool is essential for chip evacuation and tool life.
Shank fits standard holders.
The straight shank seats in common collets and hydraulic chucks without adapters. Problems usually arise when coolant filtration is poor or pressure is too low, causing the internal passages to clog and the drill to overheat. Regular filter changes and verified pressure at the spindle prevent most field failures.
Suits high-volume production in steel
Shops running lights-out cycles or difficult materials such as titanium and high-temperature alloys gain consistent performance from the through-coolant design. Operations limited to flood coolant only, or those drilling shallow holes in soft aluminium, will not use the drill’s core advantage and should consider a standard twist drill instead.
Highlights
- Twister HPD design delivers high-performance coolant drilling
- 30 mm diameter suits precise hole-making tasks
- 5x drilling capability enables deeper cuts efficiently
- M.A. Ford brand ensures professional-grade tool reliability
- California Proposition 65 compliance provides safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I verify the 13.30 mm Twister HPD coolant drill is cutting correctly after installation?
Check that chips evacuate cleanly through the coolant channels and measure the hole diameter against the 13.30 mm specification for consistent sizing
What comes with the HPDCR 1330A drill and what must I supply separately?
The drill itself is included; you will need a compatible coolant-fed tool holder and a coolant delivery system to use the internal channels
When should I choose the 13.30 mm 5X version over other sizes?
Select this 13.30 mm 5X drill when your application requires a 13.30 mm diameter hole at five-times-diameter depth with through-coolant capability
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
