M.A. Ford
M.A. Ford HPDCR 1320A Twister HPD coolant drill 13.20 mm
A 13.20 mm coolant-fed drill bit for high-performance drilling applications
- 20 mm diameter drills precise holes
- Twister HPD design improves coolant flow
- 5X drilling speed accelerates production
- M.A. Ford quality ensures reliable performance
- California Proposition 65 warning included for safety
13.20 mm Twister HPD coolant drill
The M.A. Ford HPDCR 1320A is a 13.20 mm high-performance coolant drill designed for precision drilling applications. It delivers coolant directly to the cutting zone for improved tool life and hole quality. This new tool targets machinists and maintenance technicians who require reliable deep-hole drilling capability.
Suited for high-pressure coolant systems
Operators running machines with through-spindle coolant will benefit from the 5X design optimised for that environment. Shops without high-pressure coolant capability or those needing diameters outside 13.20 mm should consider alternative tooling. The Proposition 65 notice also applies for users in regulated environments.
5X diameter capacity for deep holes
The drill comfortably handles depths up to five times its 13.20 mm diameter, providing headroom for typical deep-hole requirements. Beyond that depth range, chip evacuation and coolant pressure may become limiting factors. The 1320 series designation reflects this specific size and length ratio.
Highlights
- 20 mm diameter drills precise holes
- Twister HPD design improves coolant flow
- 5X drilling speed accelerates production
- M.A. Ford quality ensures reliable performance
- California Proposition 65 warning included for safety
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill chuck capacity is needed to hold the 13.20 mm shank?
A chuck that opens to at least 13.20 mm is required to secure the drill.
Will the 5X coolant-through design work with a standard external coolant pump?
Yes, the through-tool coolant channels accept standard coolant supply fittings.
How can I confirm the drill is cutting correctly after installation?
Check for consistent chip evacuation through the coolant holes and measure hole diameter against the 13.20 mm spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
