M.A. Ford
M.A. Ford HPDCR 1220A Twister HPD Coolant Drill 5X 12.20mm
A 12.20 mm coolant-fed drill designed for high-performance drilling applications
- Twister HPD design delivers efficient coolant-through drilling
- 20 mm diameter suits precise hole-making tasks
- 5X flute geometry supports faster chip evacuation
- M.A. Ford quality ensures reliable performance in demanding applications
- California Proposition 65 warning informs safe handling practices
M.A. Ford Twister HPD Coolant Drill
The M.A. Ford HPDCR 1220A Twister is a high-performance coolant drill designed for precision hole-making in demanding materials. Its 5X diameter capability supports deeper drilling cycles while the integrated coolant channels deliver fluid directly to the cutting zone. This tool targets machinists and fabrication shops that require consistent accuracy and extended tool life in production environments. The 12.20mm cutting diameter suits specific hole-size requirements in metalworking applications.
Suited for high-volume metal drilling
This drill suits operators running CNC machines or rigid manual setups where through-spindle coolant is available and deeper holes up to five times the diameter are routine. It is not intended for handheld use, for machines without through-coolant capability, or for materials outside the high-performance drilling range. Buyers who need a standard twist drill without coolant feed or a shorter length-to-diameter ratio should look at alternative tooling.
Verify machine coolant delivery
Before ordering, confirm that your machine provides through-spindle coolant at the pressure and flow rate required for deep-hole drilling. Check that your tool holder accepts a 12.20mm shank and that the work envelope accommodates the 5X drill length. Review the material-specific cutting data to ensure the parameters match your application. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Twister HPD design delivers efficient coolant-through drilling
- 20 mm diameter suits precise hole-making tasks
- 5X flute geometry supports faster chip evacuation
- M.A. Ford quality ensures reliable performance in demanding applications
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system are required to run the 12.20 mm HPDCR 1220A Twister HPD drill?
The drill needs a CNC or rigid machine spindle that accepts a 12.20 mm shank and a through-spindle or external coolant supply capable of delivering high-pressure fluid to the internal channels.
Can the 12.20 mm Twister HPD drill be used in an older machining centre with lower coolant pressure?
It will physically fit a compatible 12.20 mm holder, but the internal coolant passages are designed for high-pressure delivery; reduced pressure may limit chip evacuation and tool life.
How can I confirm the 12.20 mm HPDCR 1220A is cutting correctly after installation?
Check for consistent chip formation, stable spindle load, steady coolant flow from the drill tip, and hole diameter within tolerance at the 12.20 mm size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
