M.A. Ford
M.A. Ford HPDCR 1210A Twister HPD Coolant Drill 5X 12.10 mm
A 12.10 mm Twister HPD coolant drill designed for high-performance drilling applications
- 5x coolant drilling for efficient chip removal
- 10 mm diameter for precise hole sizing
- Twister HPD design for high-performance drilling
- M.A. Ford manufacturing for professional quality
- California Proposition 65 chemical warning applies
12.10 mm coolant drill for high-performance drilling
The M.A. Ford HPDCR 1210A Twister HPD is a coolant-fed drill designed for high-performance drilling applications. Its 12.10 mm diameter suits precise hole-making in demanding materials. The tool targets machinists and maintenance professionals who require reliable coolant-through capability for extended tool life and chip evacuation.
Upgrade from standard twist drills without
This drill replaces conventional twist drills that rely on external flood coolant or dry cutting. The internal coolant channel delivers fluid directly to the cutting zone, which becomes worthwhile when drilling deeper holes or tough alloys where heat buildup and chip packing reduce standard drill life. The 5X designation indicates a length-to-diameter ratio suited for deeper drilling cycles.
Limited by machine spindle coolant capability
The coolant-through function requires a machine spindle and tool holder rated for high-pressure coolant delivery. Without that infrastructure, the internal channels cannot be used and the drill operates as a standard solid tool. The 12.10 mm shank diameter also dictates the holder bore size, so the drill cannot be clamped in holders sized for other diameters.
Highlights
- 5x coolant drilling for efficient chip removal
- 10 mm diameter for precise hole sizing
- Twister HPD design for high-performance drilling
- M.A. Ford manufacturing for professional quality
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 12.10 mm Twister HPD coolant drill need to fit my holder?
The drill has a 12.10 mm diameter shank, so it requires a holder or collet that accepts exactly 12.10 mm round shanks.
How do I install the HPDCR 1210A drill and what step is often missed?
Clamp the drill by its shank in a compatible coolant-fed holder, then verify that the internal coolant passages align before tightening; skipping the alignment check blocks coolant flow.
When will the 12.10 mm Twister HPD drill need replacement?
Replace the drill when the cutting edges show visible wear, chipping, or when hole quality and coolant-through performance drop below your tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
